Settings

This setting lets you set the resolution of the panorama. The default resolution is 8K.

There are 4 resolutions: 8K x 4K, 5.6K x 2.8K, 4K x 2K and 2K x 1K. The default setting is 8K x 4K.

To set a desired resolution:

1. Select the drop down option
2. Choose the desired resolution
3. Click Done

The selected resolution will now be displayed in the drop down option.

This setting allows you to choose what type(s) of file you want to save. The default is RAW and Stitched JPEG.

There are three types of file you can save: Stitched JPEG only, RAW and Stitched JPEG and RAW only. The default setting is RAW and Stitched JPEG.

To set a desired file type:

1. Select the drop down option
2. Choose the desired file type
3. Click Done

The selected file type will now be displayed in the drop down option.

This setting allows you to choose if you wish to see a capture preview after capture has completed or not.

To set the desired option:

1. Select the drop down option
2. Choose the desired option
3. Click Done

The selected option now be displayed in the drop down list.

This setting allows you to choose if you wish to patch the nadir with a mirror ball.

To set the desired option:

1. Select the drop down option
2. Choose the desired option
3. Click Done

The selected option will now be displayed in the drop down list.

This setting allows you to choose if you wish to patch the nadir with a logo.

To set the desired option:

1. Select the drop down option
2. Choose the desired option
3. Click Done

The selected option will now be displayed in the drop down list.

This setting allows you to choose if you wish your iris360 to make a sound or not.

To set the desired option:

1. Select the drop down option
2. Choose the desired option
3. Click Done

The selected option will now be displayed in the drop down list.

This setting allows you to set the sound volume.

There are 3 volume settings: Low, Medium, Full. The default setting is Medium

To set the desired option:

1. Select the drop down option
2. Choose the desired option
3. Click Done

The selected option will now be displayed in the drop down list.

This setting allows you to choose when your iris360 will power off after a period of inactivity.

There are 5 settings: 5 minutes, 15 minutes, 30 minutes, 1 hour, Never. The default setting is 5 minutes

To set the desired option:

1. Select the drop down option
2. Choose the desired option
3. Click Done

The selected option will now be displayed in the drop down list.

This setting allows you to choose when your iris360 will use it's internal GPS only or will augment via the GPS position of the device connected to the camera.

There are 2 settings: Off and On

To set the desired option:

1. Select the drop down option
2. Choose the desired option
3. Click Done

The selected option will now be displayed in the drop down list and the GPS lock on the Settings Bar will show Amber to indicate assisted GPS lock is active.

This setting allows you to upload a logo to be used with the Add Logo option.

To upload a logo:

1. Select the Upload Logo button
2. Follow the prompts to choose and upload your logo
3. Click Upload

Your logo will now appear in the stitched image as long as you set the option Add Logo to On

This setting allows you to set the date and time on the camera. Every image captured has a unique file name based on the date and time of capture.

To set the date and time:

1. Select the Set Date and Time button
2. Follow the prompts to enter the date and time (the current date and time will be automatically displayed)
3. Click Set

The camera will now apply the date and time to every image captured.

This setting allows you to calibrate the compass.

To calibrate the compass:

1. Select the Calibrate Compass button
2. Click Calibrate
3. Follow the prompts to calibrate the compass

The compass will now be calibrated.

This setting allows you to calibrate the Tilt/Roll sensor.

To calibrate the Tilt:

1. Select the Calibrate Tilt button
2. Click Calibrate
3. Follow the prompts to calibrate the Tilt

The Tilt/Roll sensor will now be calibrated.

This setting allows you to choose a new wifi password.

Note: Camera WiFi requires WPA2-PSK protection. WPA2-PSK requires passwords that are at least 8 characters long. Password can contain letters, numbers, and symbols, but no spaces.

To change the wifi password:

1. Select the Change WiFi Password button
2. Enter the new password
3. Click Change

The new wifi password will now be set.

This setting allows you to update the camera's firmware.

The firmware on your iris360™ can be upgraded  from a microSD Card via a downloaded firmware update file. Updates will include improvements to the UI and operational functions and new features.

Updates will be posted on the Support Portal and you will receive notification via email as long as you have subscribed to the relevant Product News and Updates section. The Support Portal will detail the latest release specifications and a release schedule for future releases.

To update the firmware:

1. Insert a microSD card containing the firmware update into the unit (ensure the update file is on the ROOT of the card)
2. Select the Firmware Update button
3. Click Update
4. Follow the prompts to update the firmware

The firmware will be updated and the unit will then auto power off.

This setting allows you to update the calibration file on the unit.

The calibration file on your iris360™ can be upgraded  from a microSD Card via a downloaded calibration file. You will only be required to update the calibration file if instructed to do so by NCTech Support.

To update the calibration file:

1. Select the Calibration Update button
2. Follow the onscreen instructions
3. Press Update

The calibration file will be updated on the camera.

This setting allows you to restore all settings back to their default values.

To restore the default settings:

1. Select the Default Settings Restore button
2. Click Reset

The default settings will now be restored.